You have no items in your shopping cart.

Subtotal: $0.00
The 1.8M LOLA FPV Aerial Shooting and Filming UAV with Flaps

More Views


The 1.8M LOLA FPV Aerial Shooting and Filming UAV with Flaps


Availability: Shipped under 3 days


The Lola has been designed especially for FPV (First Person View) flying. Its 1.8m wingspan wing with epoxy made fuselage provides outstanding stability in air, and it comes with all FPV must have features plus additional functions.

The special rear mounted elevator and rudder servos help counter-balance additional weight from the FPV and radio equipment, and its large internal compartment provides plenty of space for installing radio gear, transmitter and FPV equipment with easy configuration for achieving correct centre of gravity.

There is also a flat surface on the canopy for camera easy installation.

Unlike other UAVs in the market, it comes with a fibreglass landing ski with a specially designed sponge for easy landing providing extra care to your plane and equipment.

All the general hardware (push rods, screws, landing gear etc.) in the kit to get you flying sooner.

We recommend either the D2836 1000kv motor with 8040 or 8045E Propellers or the D3714 920kv motor with 9060E propeller for best results. A 60A ESC or above and 6 standard servos are required. All available from The Build RC.

This rig has been tested with the D2836 1000kv motor and 5200mAh LiPo, for a flight time of more than 1.2 hours!

Items NOT included:

  • Radio Gear
  • Motor
  • ESC
  • Propeller
  • Servo
  • Battery and Charger

Additional Information

SKU rcpl3901026_x
Color No
Version ARF
Power Electric Motor
Wingspan (mm) 1800
Wing Area (dm. sq) 36
Wing Load (g / dm sq) 37
Wing Type No
Wing Material Balsa Wood
Fuselage Length (mm) 1170
Center of Gravity N/A
Number of Servo 16g x 6
Recommended Motor D3536 KV920
Recommended Battery 5000mAh 3S LiPo (Optional)
Recommended Radio 6 Channel (Optional)
Recommended ESC 80A
Recommended Propeller 1147
Net Weight (kg) 1.22
Free Shipping No
Package Type No
- +